Added small changes to UART and ADC

EmbeddedSystemsTHM/Tasks.c

@@ -63,6 +63,7 @@ blinkLedWithTimer (void)
 	if(Timer_getTick() - g_startMS >= 1000) { /* Wait 1000ms before switching LED1 */
 		g_startMS=Timer_getTick();
 		
+		/* Flip-Flop LED to on/off */
 		if(g_ledStatus % 2 == 0){
 			Led1_On();
 		} else {

EmbeddedSystemsTHM/Taster.c

@@ -20,16 +20,23 @@ Taster_init (void){
 
 uint8_t 
 Taster1_get (void){
+	/* Check if pin is low 
+	-> low active pin 
+	-> button is pressed 
+	-> return 1 */
 	return ((PIND & (1<<PIND7)) == 0);
 }
+
 uint8_t 
 Taster2_get (void){
 	return ((PIND & (1<<PIND6)) == 0);
 }
+
 uint8_t 
 Taster3_get (void){
 	return ((PIND & (1<<PIND5)) == 0);
 }
+
 uint8_t 
 Taster4_get (void){
 	return ((PINC & (1<<PINC2)) == 0);

EmbeddedSystemsTHM/UART.c

@@ -6,16 +6,11 @@
  */ 
 
 #include "UART.h"
+CircularBuffer TxBuffer;
+CircularBuffer* pTxBuffer = &TxBuffer;
+CircularBuffer RxBuffer;
+CircularBuffer* pRxBuffer = &RxBuffer;
 
-#define SIZE_BUFFER 500
-struct CircularBuffer{
-	volatile char data[SIZE_BUFFER];
-	volatile uint16_t Readpointer;
-	volatile uint16_t Writepointer;
-};
-
-struct CircularBuffer TxBuffer;
-struct CircularBuffer RxBuffer;
 volatile uint8_t TxActive;
 
 void 
@@ -34,10 +29,10 @@ uart_init(void)
 	(1<<TXEN0)|(1<<RXEN0)|			/* enable send and receive */
 	(1<<RXCIE0);					/* enable Receive interrupts */	
 	
-	TxBuffer.Readpointer = 0;
+	pTxBuffer->Readpointer	= 0;
-	TxBuffer.Writepointer = 0;
+	pTxBuffer->Writepointer = 0;
-	RxBuffer.Readpointer = 0;
+	pRxBuffer->Readpointer	= 0;
-	RxBuffer.Writepointer = 0;
+	pRxBuffer->Writepointer = 0;
 }
 
 /* ------------------------ */
@@ -57,28 +52,30 @@ uart_send_string(char* string)
 void
 uart_send_byte(char c)
 {
+	/* Disable the TX Interrupt */
 	UCSR0B &= ~(1<<TXCIE0);
 	
 	if(TxActive){
-		TxBuffer.data[TxBuffer.Writepointer++] = c;
+		pTxBuffer->data[pTxBuffer->Writepointer++] = c;
-		if (TxBuffer.Writepointer>=SIZE_BUFFER){
+		if (pTxBuffer->Writepointer>=SIZE_BUFFER){
-			TxBuffer.Writepointer = 0;
+			pTxBuffer->Writepointer = 0;
 		}
 	} else {
 		TxActive = 1;
 		UDR0 = c;	
 	}
+	/* Enable the TX Interrupt again*/
 	UCSR0B |= (1<<TXCIE0);
 }
 
 ISR(USART0_TX_vect)
 {	
-	if(TxBuffer.Readpointer != TxBuffer.Writepointer)
+	if(pTxBuffer->Readpointer != pTxBuffer->Writepointer)
 	{
-		UDR0 = TxBuffer.data[TxBuffer.Readpointer++];
+		UDR0 = pTxBuffer->data[pTxBuffer->Readpointer++];
 		
-		if(TxBuffer.Readpointer >= SIZE_BUFFER){
+		if(pTxBuffer->Readpointer >= SIZE_BUFFER){
-			TxBuffer.Readpointer = 0;
+			pTxBuffer->Readpointer = 0;
 		}
 	} else {
 		TxActive = 0;
@@ -94,7 +91,7 @@ uart_data_available(void)
 {
 	uint8_t dataAvailabel = 0;
 	UCSR0B &= ~(1<<RXCIE0);
-	if(RxBuffer.Readpointer != RxBuffer.Writepointer){
+	if(pRxBuffer->Readpointer != pRxBuffer->Writepointer){
 		dataAvailabel = 1;
 	}
 	UCSR0B |= (1<<RXCIE0);
@@ -106,11 +103,11 @@ uart_get_data(void)
 {
 	char data = 0;
 	UCSR0B &= ~(1<<RXCIE0);
-	if(RxBuffer.Readpointer != RxBuffer.Writepointer)
+	if(pRxBuffer->Readpointer != pRxBuffer->Writepointer)
 	{
-		data = RxBuffer.data[RxBuffer.Readpointer++];
+		data = pRxBuffer->data[pRxBuffer->Readpointer++];
-		if(RxBuffer.Readpointer >= SIZE_BUFFER){
+		if(pRxBuffer->Readpointer >= SIZE_BUFFER){
-			RxBuffer.Readpointer = 0;
+			pRxBuffer->Readpointer = 0;
 		}
 	}
 	UCSR0B |= (1<<RXCIE0);
@@ -123,9 +120,9 @@ ISR(USART0_RX_vect)
 	uint8_t data = UDR0;
 	
 	if((status & ((1<<DOR0) | (1>>FE0))) == 0){
-		RxBuffer.data[RxBuffer.Writepointer++] = data;
+		pRxBuffer->data[pRxBuffer->Writepointer++] = data;
-		if(RxBuffer.Writepointer >= SIZE_BUFFER) {
+		if(pRxBuffer->Writepointer >= SIZE_BUFFER) {
-			RxBuffer.Writepointer = 0;
+			pRxBuffer->Writepointer = 0;
 		}
 	}
 }

EmbeddedSystemsTHM/UART.h

@@ -11,6 +11,15 @@
 #ifndef UART2_H_
 #define UART2_H_
 
+#define SIZE_BUFFER 500
+
+typedef struct CircularBuffer CircularBuffer;
+struct CircularBuffer{
+	volatile char data[SIZE_BUFFER];
+	volatile uint16_t Readpointer;
+	volatile uint16_t Writepointer;
+};
+
 void uart_init(void);
 void uart_send_byte(char c);
 void uart_send_string(char* string);

EmbeddedSystemsTHM/adc.c

@@ -7,36 +7,6 @@
 
 #include "adc.h"
 
-typedef struct ADC_t ADC_t;
-struct ADC_t{
-	/* ADC Data */
-	uint16_t uiADC :16;
-	
-	/* ADCSRA */
-	uint8_t uiADPS0 :1;
-	uint8_t uiADPS1 :1;
-	uint8_t uiADPS2 :1;
-	uint8_t uiADIE :1;
-	uint8_t uiADIF :1;
-	uint8_t uiADATE :1;
-	uint8_t uiADSC :1;
-	uint8_t uiADEN :1;
-	
-	/* ADCSRB */
-	uint8_t uiADTS0 :1;
-	uint8_t uiADTS1 :1;
-	uint8_t uiADTS2 :1;
-	uint8_t nui2 :3;
-	uint8_t uiACME :1;
-	uint8_t nui1 :1;
-	
-	/* ADMUX */
-	uint8_t uiMUX :5;
-	uint8_t uiADLAR :1;
-	uint8_t uiREFS0 :1;
-	uint8_t uiREFS1 :1;
-};
-
 #define myADC ((ADC_t*)(0x78))
 
 void 
@@ -46,9 +16,7 @@ adc_init(void)
 	myADC->uiREFS0 = 0;		/* Set ADLAR to 0 to not left adjust the presentation of the conversion result */
 	myADC->uiREFS1 = 0;		/* Set Voltage reference to 2.56V */
 	
-	myADC->uiADPS0 = 1;		/* Set ADC Prescaler to 128 */
+	myADC->uiADPS = 7;		/* Set ADC Prescaler to 128 */
-	myADC->uiADPS1 = 1;
-	myADC->uiADPS2 = 1;
 	myADC->uiADIE = 1;		/* Enable the ADC interrupt */
 	myADC->uiADATE = 0;		/* Disable the ADC auto trigger */
 	myADC->uiADEN = 1;		/* Enable ADC */

EmbeddedSystemsTHM/adc.h

@@ -11,6 +11,34 @@
 #ifndef ADC_H_
 #define ADC_H_
 
+typedef struct ADC_t ADC_t;
+struct ADC_t{
+	/* ADC Data */
+	uint16_t uiADC :16;
+	
+	/* ADCSRA */
+	uint8_t uiADPS :3;
+	uint8_t uiADIE :1;
+	uint8_t uiADIF :1;
+	uint8_t uiADATE :1;
+	uint8_t uiADSC :1;
+	uint8_t uiADEN :1;
+	
+	/* ADCSRB */
+	uint8_t uiADTS0 :1;
+	uint8_t uiADTS1 :1;
+	uint8_t uiADTS2 :1;
+	uint8_t nui2 :3;
+	uint8_t uiACME :1;
+	uint8_t nui1 :1;
+	
+	/* ADMUX */
+	uint8_t uiMUX :5;
+	uint8_t uiADLAR :1;
+	uint8_t uiREFS0 :1;
+	uint8_t uiREFS1 :1;
+};
+
 void adc_init(void);
 
 uint16_t adc_get_poti(void);